Ping Test
Ping any website or public IP from our server: reply times, packet loss, jitter and TTL for each packet – check whether a host is up and how healthy the path is.
Ping is the first test in any network fault: is the host there, and how healthy is the path to it? This tool pings a website, server or router from our server in Australia and shows each reply, the packet loss, the minimum, average and maximum response time and the jitter – an outside view that is independent of your own connection.
How to use it
- Enter a hostname such as
example.comor a public IP address such as1.1.1.1. - Choose how many packets to send – 10 gives a better picture of loss and jitter.
- Read the quality rating, then the bars: steady bars are healthy, long or missing bars show delay and loss.
Reading the result
- No replies at all – the host may be down, but many firewalls simply block ping. Test the real service with the Website Checker or Open Port Checker.
- Some lost packets – congestion, a bad link or Wi-Fi trouble somewhere on the path. Run a traceroute to see where.
- High jitter – response times swing; voice and video calls will break up even if the average looks fine.
Test from both sides
Ping the same host from your own PC (ping -n 20 example.com on Windows, ping -c 20 example.com on Linux and macOS). If our server gets clean replies and you don’t, the problem is between you and your ISP.
常见问题
The ping fails but the website opens – why?
Many servers and firewalls drop ICMP (ping) on purpose. A failed ping only proves that ICMP is blocked; use the Website Checker or Port Checker to test the actual service.
What is a good ping time?
Within the same country, under 30 ms is excellent; between continents 150–300 ms is normal because of the distance. Steady times matter more than low ones – big swings (jitter) hurt calls and games.
What does packet loss mean?
Some packets never came back. Occasional loss on a busy link is normal, but steady loss of 2 % or more causes slow pages, choppy calls and dropped VPNs.
更多工具
全部工具 →Traceroute (MTR)
See every router between our server and a destination, with packet loss and latency per hop (MTR report) – find where a connection slows down or breaks.
打开工具 Network troubleshootingOpen Port Checker
Check from the internet whether ports are open, closed or filtered on a server or router – port forwarding, firewalls, mail, RDP, SSH and VPN in one test.
打开工具 Network troubleshootingWebsite Down? HTTP Status & Speed Checker
Is a website down for everyone or just you? See the HTTP status, every redirect, DNS/connect/TLS/first-byte timings and the security and caching headers.
打开工具